ALTERPATH-ACS UPGRADE TABLE
IMPORTANT: Before you upgrade your ACS, please check the table below to see which restrictions may apply and which procedures to follow. If you have any question, please contact Cyclades Technical Support before you attempt to upgrade your unit.
|
|
To: |
|||||||
|
From: |
|
210 |
211 |
212 |
213 |
214 |
2141 |
215 |
|
210 |
|
*1 |
*2 |
*2 |
*2 |
*2 |
*2 |
|
|
211 |
|
|
*OK |
*OK |
*OK |
*OK |
*OK |
|
|
212 |
|
|
|
*OK |
*OK |
*OK |
*OK |
|
|
213 |
|
|
|
|
*OK |
*OK |
*OK |
|
|
214 |
|
|
|
|
|
*OK |
*OK |
|
|
2141 |
|
|
|
|
|
|
*OK |
|
|
215 |
|
|
|
|
|
|
|
|
*OK. In this case, you can just replace your current ACS
firmware file (zImage) with the new one located under the directory
correspondent to the new ACS firmware version.
Ex: /pub/cyclades/alterpath/acs/released/V_2.1.5/
*1. If your current ACS firmware version is 210 and you
want to upgrade to the firmware version 211, you will have to upgrade the
Alternate boot code also.
Please,
follow the upgrade instructions located under the directory correspondent to
the ACS 211 firmware version.
Ex:
/pub/cyclades/alterpath/acs/released/V_2.1.1/acs211.txt
*2. If your current ACS firmware version is 2.1.0 and
you want to upgrade to the firmware version 2.1.2 or above you have to upgrade
your ACS to the firmware version 2.1.1 first (*1).
Please,
follow the upgrade instructions located under the directory correspondent to
the ACS 2.1.1 firmware version, and then upgrade your ACS to the next version
2.1.2 or above (*OK).
All
the available firmware releases are available at:
ftp://ftp.cyclades.com/pub/cyclades/alterpath/acs/released/
Regards,
Cyclades
Technical Support